Skip to content
Technology — Home — Career — Manufacturing — Finance — Industry

Troubleshooting Ethernet Invalid IP Configuration on Windows Operating System

Tackling Windows Ethernet Issues: A Comprehensive Guide for Resolving Connection Hiccups

,   and  Administrator
3 min read
Solving Windows Ethernet Issues: A Detailed Troubleshooting Guide
Solving Windows Ethernet Issues: A Detailed Troubleshooting Guide

Troubleshooting Ethernet Invalid IP Configuration on Windows Operating System

Fixing the "Ethernet doesn't have a valid IP configuration" headache on Windows 10 or 11 isn't too tough. Here's the lowdown on how to get your Internet connection humming again.

The Scoop

When the blue screen of death pops up with an ethernet doesn't have a valid IP configuration error, it means your Windows 10 or 11 PC ain't getting no loves from your router. The troubleshooter might help, but sometimes it's just a frustrating waste of time. No worries, though. This step-by-step guide will help you get back online in no time.

Steps to Salvation

Give Your PC a Quick Reboot

If you've just noticed the issue, try restarting your PC. A simple reboot often does the trick.

Run the Network Troubleshooter

  1. Open Cortana (you know, the little search bar in the bottom-left corner) and type troubleshoot network problems, or repetidamente clic en Cambiar, dep déndiendo de tu Windows version.
  2. Click Sí, deja que Windows comprobe tu conexión a internet.
  3. If you still see "Ethernet doesn't have a valid IP configuration," continue troubleshooting.

Restart Your Home Network

  1. Power down and unplug all network devices. This includes the modem, router, and any switches you're connected to.
  2. Disconnect the power cable and the ethernet cable from your router (and modem, if separate). Leave everything off for at least 30 seconds before turning it back on.
  3. Once your router's back online, test the connection again. If you still can't connect, run the network troubleshooter again.

Restart Your Ethernet Adapter

  1. In Cortana, search for Network connections.
  2. Right-click your ethernet adapter and click Disable.
  3. Wait a few seconds and then re-enable the ethernet connection.
  4. Run the network troubleshooter again.

Renew Your IP Address

  1. Run Command Prompt as administrator by searching for Command Prompt and right-clicking the app, then selecting Run as administrator.
  2. Type the command ipconfig /release and press Enter. This releases the last IP address.
  3. Now type ipconfig /renew and press Enter again. Windows will request a new IP from your router.
  4. After the IP address is renewed, you should see an IPv4 and/or IPv6 address under your ethernet adapter. If the operation failed, you may have configured a static IP address for your PC. If your IP address is supposed to be dynamically assigned, you will need to open your TCP/IP settings and select Obtain an IP address automatically.

Check your IP Settings

  1. Search for Network connections.
  2. Right-click your ethernet adapter and select Properties.
  3. If IPv6 is not checked, enable it by checking the box.
  4. Make sure Ipv6 is set to automatically obtain an IP address, and then click OK.
  5. Select Ipv4 and click the Properties button.
  6. Ensure Ipv4 is also set to Obtain an IP address automatically.
  7. If you are focusing on a static IP address, make sure all IP-related settings are correct, otherwise, use Obtain an IP address automatically.
  8. Restart your PC and router after making changes.

Reset the TCP/IP Stack

  1. Open Command Prompt as administrator.
  2. Type netsh int ip reset and press Enter.
  3. Restart your PC to complete the reset.

Connect Directly to the Router

If you're connected to a switch, bypassing it might resolve the problem. Once connected directly to the router, test the internet connection again. If you can connect to the Internet but not through the switch, your switch is probably having issues.

Reinstall Your Ethernet Drivers

  1. Open Device Manager by right-clicking the Start menu and selecting Device Manager.
  2. Click the arrow next to Network Adapters.
  3. Right-click your ethernet card and click Uninstall device. If prompted, click Uninstall to confirm. Your PC will install a new default ethernet driver when you restart.
  4. If you're connected to the Internet, it's better to follow this method.

Reset Network Settings

  1. Open Settings.
  2. Click Network & Internet.
  3. Click Advanced Network Settings.
  4. Click Network Reset then Reset now. Note that your saved network settings, including any Wi-Fi passwords and VPN settings, will be deleted.
  5. Power down your router, disconnect the ethernet cable from your PC, and give it a minute.
  6. Turn the router back on and plug the ethernet cable back in.

Check Your Router Configuration

  1. If the problem persists, the issue might be router-related.
  2. Log into your router as an administrator and make sure DHCP is enabled.
  3. If you received your router from your ISP and haven't changed the settings, try resetting it by inserting a paperclip or SIM tool into the reset hole on the router.
  4. You may need to replace your router if the problem continues. Contact your ISP or the manufacturer for assistance.
  5. Technology can be a crucial part of ensuring a smooth operation within various industries such as manufacturing, finance, and data-and-cloud-computing, enhancing productivity and efficiency.
  6. In today's home, technology plays an essential role, with devices like routers and modems being key components for internet connectivity.
  7. A reliable internet connection is vital for many aspects of a career, from file transfers to video conferencing, emphasizing the importance of resolving issues like "Ethernet doesn't have a valid IP configuration."
  8. As technology advances, so does the need for continuous learning and adapting to new solutions, such as the troubleshooting steps outlined in this guide, to ensure uninterrupted connectivity.

Read also:

    Related

    Latest